(Advertisements are not shown for registered users)

Mugen Spoiler brackets?

Anything goes, as long as it follows the Community Rules.

Moderator: Moderators

Mugen Spoiler brackets?

Postby kinq » Sat Nov 06, 2010 7:53 pm

Does anyone happen to know anywhere to get brackets or a mugen wing or perhaps a writeup on how to make them? It's the wing that sits flush with the hatch and curves down the sides. Thanks for any info I've seen a few posts about it on here but none that had any answers.
91 si. Just short of perfect. Oem with tasteful upgrades.
User avatar
kinq
 
Posts: 355
Joined: Mon Dec 01, 2008 11:35 pm
Location: South Jersey

Re: Mugen Spoiler brackets?

Postby JDMCrx91 » Sat Nov 06, 2010 8:54 pm

Good luck with that.I got a real mugen spoiler but its missing the brackets. I been looking for them for 2 years and still nothing lol. I asked here and someone said they would make me some but never did :(
NOW, i got some brackets but they are the ones that come with the wing west replica spoiler. I dont use them cause they look weak and i just want the oem ones.
"Correct Me If I'm Wrong... That's Why I Joined" Crxcommunity.com
1991 Crx Si(turbo)
My Build Thread http://crxcommunity.com/viewtopic.php?f=26&t=34412
1991 Crx Si (sleeper) 3/17/13
viewtopic.php?f=26&t=64610
1992 240sx coupe
User avatar
JDMCrx91
 
Posts: 5248
Joined: Sat Feb 14, 2009 5:53 pm
Location: DFW,Texas

Re: Mugen Spoiler brackets?

Postby kinq » Sat Nov 06, 2010 9:02 pm

well I plan on using them as an added support with the 3m heavy duty mounting tape. Any chance you'd be willing ship those brackets if you're not using them?
91 si. Just short of perfect. Oem with tasteful upgrades.
User avatar
kinq
 
Posts: 355
Joined: Mon Dec 01, 2008 11:35 pm
Location: South Jersey

Re: Mugen Spoiler brackets?

Postby JDMCrx91 » Sat Nov 06, 2010 9:06 pm

hehe no im not using them but they are not for sell man sorry, but try contacting west wing company and ask them for those brackets.
"Correct Me If I'm Wrong... That's Why I Joined" Crxcommunity.com
1991 Crx Si(turbo)
My Build Thread http://crxcommunity.com/viewtopic.php?f=26&t=34412
1991 Crx Si (sleeper) 3/17/13
viewtopic.php?f=26&t=64610
1992 240sx coupe
User avatar
JDMCrx91
 
Posts: 5248
Joined: Sat Feb 14, 2009 5:53 pm
Location: DFW,Texas

Re: Mugen Spoiler brackets?

Postby ollie » Sat Nov 13, 2010 1:43 pm

Sorry I have not seen this sooner.
I just acquired a new job and I have access to a full metal shop... I will try and make 2 sets....
when I get them made here(i'll ask to use the metal brake here at work)...and make a couple of sets...
...Thrashy. said...."Robb, if my car ever breaks down, I'll never have to worry because I can just shout "CRX FLOORMATS!" and within an hour you'll be right there to tell me about yours. 8)" ahhhhhahahahahahah

1989 EF9 project "Backburner" in restoration. :)
User avatar
ollie
Site Admin
 
Posts: 4668
Joined: Sun Feb 27, 2005 9:28 pm
Location: Detroit,Michigan

Re: Mugen Spoiler brackets?

Postby kinq » Sat Nov 13, 2010 6:18 pm

That would be awesome Ollie!
91 si. Just short of perfect. Oem with tasteful upgrades.
User avatar
kinq
 
Posts: 355
Joined: Mon Dec 01, 2008 11:35 pm
Location: South Jersey

Re: Mugen Spoiler brackets?

Postby JDMCrx91 » Sat Nov 13, 2010 9:38 pm

Nice!!!!Finally i get install it.Let us know when they be ready. Also,I met this guy in honda tech that needs the brackets too, so i think you should make more..you could sell them there or ebay.
"Correct Me If I'm Wrong... That's Why I Joined" Crxcommunity.com
1991 Crx Si(turbo)
My Build Thread http://crxcommunity.com/viewtopic.php?f=26&t=34412
1991 Crx Si (sleeper) 3/17/13
viewtopic.php?f=26&t=64610
1992 240sx coupe
User avatar
JDMCrx91
 
Posts: 5248
Joined: Sat Feb 14, 2009 5:53 pm
Location: DFW,Texas

Re: Mugen Spoiler brackets?

Postby chagood8267 » Mon Nov 15, 2010 9:24 am

if ya get em done i need some to just hit me up with a price if ya can do em :D
84 ls1 silverado (Junk Hauler)
06 civic (The Daily)
89 y49 crx (New to me Autox and TT car)
07 Tahoe (Baby Hauler)
91 Civic Wagon (Long way to go)
User avatar
chagood8267
 
Posts: 788
Joined: Wed Dec 23, 2009 4:08 pm
Location: Moulton, AL

Re: Mugen Spoiler brackets?

Postby ollie » Mon Nov 15, 2010 5:32 pm

I'm on it....They will be well made too....I'm on the hunt locally for a sheet of stainless steel so they will not rust!.....
If you guys don't hear back from me in 7 days blow up my pm box... :D
As soon as I find a suitable sheet of SS Its ON! :-)b
...Thrashy. said...."Robb, if my car ever breaks down, I'll never have to worry because I can just shout "CRX FLOORMATS!" and within an hour you'll be right there to tell me about yours. 8)" ahhhhhahahahahahah

1989 EF9 project "Backburner" in restoration. :)
User avatar
ollie
Site Admin
 
Posts: 4668
Joined: Sun Feb 27, 2005 9:28 pm
Location: Detroit,Michigan

Re: Mugen Spoiler brackets?

Postby kinq » Mon Nov 15, 2010 6:35 pm

ollie wrote:I'm on it....They will be well made too....I'm on the hunt locally for a sheet of stainless steel so they will not rust!.....
If you guys don't hear back from me in 7 days blow up my pm box... :D
As soon as I find a suitable sheet of SS Its ON! :-)b



Just let us know the price Ollie. And again I really appreciate you taking the time to make them.
91 si. Just short of perfect. Oem with tasteful upgrades.
User avatar
kinq
 
Posts: 355
Joined: Mon Dec 01, 2008 11:35 pm
Location: South Jersey

Re: Mugen Spoiler brackets?

Postby chagood8267 » Tue Nov 16, 2010 9:32 am

kinq wrote:
ollie wrote:I'm on it....They will be well made too....I'm on the hunt locally for a sheet of stainless steel so they will not rust!.....
If you guys don't hear back from me in 7 days blow up my pm box... :D
As soon as I find a suitable sheet of SS Its ON! :-)b



Just let us know the price Ollie. And again I really appreciate you taking the time to make them.


x2 man pricate it
84 ls1 silverado (Junk Hauler)
06 civic (The Daily)
89 y49 crx (New to me Autox and TT car)
07 Tahoe (Baby Hauler)
91 Civic Wagon (Long way to go)
User avatar
chagood8267
 
Posts: 788
Joined: Wed Dec 23, 2009 4:08 pm
Location: Moulton, AL

Re: Mugen Spoiler brackets?

Postby ollie » Tue Nov 16, 2010 5:00 pm

NP guys...yeah sorry JDMCrx91....I got layed off and "things" just got sidetracked...
As soon as I get a price from my metal shop at work I'll have an idea on the cost...
..AND as soon as I get the first set made up I can snap a couple of pics..I'll give you guys a shipped price so there is no guessing.....ok?
...Thrashy. said...."Robb, if my car ever breaks down, I'll never have to worry because I can just shout "CRX FLOORMATS!" and within an hour you'll be right there to tell me about yours. 8)" ahhhhhahahahahahah

1989 EF9 project "Backburner" in restoration. :)
User avatar
ollie
Site Admin
 
Posts: 4668
Joined: Sun Feb 27, 2005 9:28 pm
Location: Detroit,Michigan

Re: Mugen Spoiler brackets?

Postby TPZVTECREX » Wed Nov 17, 2010 1:04 pm

interested aswell whats the update on the brackets guys :-)b
User avatar
TPZVTECREX
 
Posts: 1817
Joined: Sat May 01, 2010 5:36 am
Location: Los Angeles CA

Re: Mugen Spoiler brackets?

Postby Baker » Wed Nov 17, 2010 1:42 pm

TPZVTECREX wrote:interested aswell whats the update on the brackets guys :-)b


It's been a day, give him a little more time....

ollie wrote:As soon as I get a price from my metal shop at work I'll have an idea on the cost...
..AND as soon as I get the first set made up I can snap a couple of pics..I'll give you guys a shipped price so there is no guessing.....ok?
User avatar
Baker
Mr. Search
 
Posts: 20820
Joined: Sat Aug 12, 2006 8:48 am
Location: Between Cortland & Ithaca, NY

Re: Mugen Spoiler brackets?

Postby g4crx » Fri Nov 19, 2010 6:43 am

Some info here...

http://board.hondacrx.co.uk/phpbb2/view ... er+bracket

-----------------
mango wrote:I just took these photos and did the sketch of the brackets that often seem to be missing from mugen spoilers, ie the piece that attaches to the bootlid, for the fella that bought my surplus kit and thought I may aswell post them for anyone else they might help. :)

The dimensioned sketch is traced around my actual brackets, now whether the two sides that aren't parallel here are supposed to be I don't know, both of mine are splayed similarly so maybe they are supposed to be like that

Image

Image

Image

Image

Image

Image

Image

Image

There's another bracket which attaches to the spoiler that these pull against, mine are still attached to my spoiler, so I'm assuming that's how most people find themselves.. with brackets on the spoiler but missing these ones.

However, in the interests of completeness I'll do the other ones when I get a chance.

Hope that helps :D
1991 CR-X SiR Mugen Glass Roof
2007 RX-8 231PS MS
1991 Glass Roof Si EF7, 1993 BB1 Prelude, 2005 Lexus IS200 [SOLD]

Build thread
User avatar
g4crx
 
Posts: 790
Joined: Mon Oct 16, 2006 1:05 pm
Location: London - UK

Re: Mugen Spoiler brackets?

Postby g4crx » Fri Nov 19, 2010 6:44 am

More info...

http://board.hondacrx.co.uk/phpBB2/view ... hp?t=70537

forb wrote:A few people have asked for these so i thought Id post them up...

Made from 2mm steel.

As the photos show there is a slight angle to the triangular parts of the brackets, would probably be best to bend this in to suit your car.

The U shaped pieces screw to the back of the spoiler, then the larger bracket clamps the U bracket/spoiler to the back of the tailgate.

Then a self tapper secures to the side of the tailgate.

Would be wise to position the spoiler using sticky back foam in place before attaching brackets.

pics:
Image

Image

Image

HTH :D
1991 CR-X SiR Mugen Glass Roof
2007 RX-8 231PS MS
1991 Glass Roof Si EF7, 1993 BB1 Prelude, 2005 Lexus IS200 [SOLD]

Build thread
User avatar
g4crx
 
Posts: 790
Joined: Mon Oct 16, 2006 1:05 pm
Location: London - UK

Re: Mugen Spoiler brackets?

Postby JDMCrx91 » Sun Nov 21, 2010 10:34 am

Niiice sucks I dont have any fabrication skills. Still want those 2 brackets ollie let us know when they r done:)
"Correct Me If I'm Wrong... That's Why I Joined" Crxcommunity.com
1991 Crx Si(turbo)
My Build Thread http://crxcommunity.com/viewtopic.php?f=26&t=34412
1991 Crx Si (sleeper) 3/17/13
viewtopic.php?f=26&t=64610
1992 240sx coupe
User avatar
JDMCrx91
 
Posts: 5248
Joined: Sat Feb 14, 2009 5:53 pm
Location: DFW,Texas

Re: Mugen Spoiler brackets?

Postby ollie » Sun Nov 21, 2010 11:28 pm

Thanks g4 your measurements have been most helpful...
One prototype down 1 to go. :-)b

Now all my brackets will be stainless and have quality hardware(i.e. 4mm hex screws,button head screw)
...Thrashy. said...."Robb, if my car ever breaks down, I'll never have to worry because I can just shout "CRX FLOORMATS!" and within an hour you'll be right there to tell me about yours. 8)" ahhhhhahahahahahah

1989 EF9 project "Backburner" in restoration. :)
User avatar
ollie
Site Admin
 
Posts: 4668
Joined: Sun Feb 27, 2005 9:28 pm
Location: Detroit,Michigan

Re: Mugen Spoiler brackets?

Postby imgoingforit » Sun Nov 21, 2010 11:40 pm

:-)b
sxysweed wrote:They're good for cool points on NWP and that's about it.
jdmtruong wrote:had some rotas but u know gotta have the real rims
User avatar
imgoingforit
 
Posts: 5676
Joined: Wed Oct 11, 2006 3:27 pm
Location: KY

Re: Mugen Spoiler brackets?

Postby kinq » Mon Nov 22, 2010 12:12 pm

ollie wrote:Thanks g4 your measurements have been most helpful...
One prototype down 1 to go. :-)b

Now all my brackets will be stainless and have quality hardware(i.e. 4mm hex screws,button head screw)



Can't wait to see them and, more importantly, use them.
91 si. Just short of perfect. Oem with tasteful upgrades.
User avatar
kinq
 
Posts: 355
Joined: Mon Dec 01, 2008 11:35 pm
Location: South Jersey

Re: Mugen Spoiler brackets?

Postby g4crx » Wed Nov 24, 2010 8:09 am

Apologies, not my brackets, I don't even have a Mugen spoiler - was just trying to help you guys out with info that's already been posted elsewhere.

Ash
1991 CR-X SiR Mugen Glass Roof
2007 RX-8 231PS MS
1991 Glass Roof Si EF7, 1993 BB1 Prelude, 2005 Lexus IS200 [SOLD]

Build thread
User avatar
g4crx
 
Posts: 790
Joined: Mon Oct 16, 2006 1:05 pm
Location: London - UK

Re: Mugen Spoiler brackets?

Postby JDMCrx91 » Sat Nov 27, 2010 4:45 pm

any updates on the brackets.
"Correct Me If I'm Wrong... That's Why I Joined" Crxcommunity.com
1991 Crx Si(turbo)
My Build Thread http://crxcommunity.com/viewtopic.php?f=26&t=34412
1991 Crx Si (sleeper) 3/17/13
viewtopic.php?f=26&t=64610
1992 240sx coupe
User avatar
JDMCrx91
 
Posts: 5248
Joined: Sat Feb 14, 2009 5:53 pm
Location: DFW,Texas

Re: Mugen Spoiler brackets?

Postby azulito » Sun Nov 28, 2010 9:55 pm

ollie wrote:Thanks g4 your measurements have been most helpful...
One prototype down 1 to go. :-)b

Now all my brackets will be stainless and have quality hardware(i.e. 4mm hex screws,button head screw)


So I guess I should pay you for your spoiler then I can get some brackets too!?!?! :-)

Hey man~ I'm glad to hear things are picking up!
User avatar
azulito
 
Posts: 734
Joined: Tue Dec 13, 2005 4:15 pm
Location: Pittsburgh

Re: Mugen Spoiler brackets?

Postby ollie » Wed Dec 01, 2010 7:24 pm

azulito wrote:
ollie wrote:Thanks g4 your measurements have been most helpful...
One prototype down 1 to go. :-)b

Now all my brackets will be stainless and have quality hardware(i.e. 4mm hex screws,button head screw)


So I guess I should pay you for your spoiler then I can get some brackets too!?!?! :-)

Hey man~ I'm glad to hear things are picking up!

Well I did wonder if I was ever going to see any cash-ola from a certain friend.. :wink: :lol:

Anyhow guys....I could not find a suitable section at work so I had to buy a sheet of 304 Stainless online....its on its way to my place..as soon as it gets here,I'll get it rolling ..I ordered it today so I figure 4 business days and I should have it.
When it is done I'll post up and get them out..
...Thrashy. said...."Robb, if my car ever breaks down, I'll never have to worry because I can just shout "CRX FLOORMATS!" and within an hour you'll be right there to tell me about yours. 8)" ahhhhhahahahahahah

1989 EF9 project "Backburner" in restoration. :)
User avatar
ollie
Site Admin
 
Posts: 4668
Joined: Sun Feb 27, 2005 9:28 pm
Location: Detroit,Michigan

Re: Mugen Spoiler brackets?

Postby JDMCrx91 » Fri Dec 03, 2010 8:59 am

Niice. How many pairs will you be making? Cant wait:)
"Correct Me If I'm Wrong... That's Why I Joined" Crxcommunity.com
1991 Crx Si(turbo)
My Build Thread http://crxcommunity.com/viewtopic.php?f=26&t=34412
1991 Crx Si (sleeper) 3/17/13
viewtopic.php?f=26&t=64610
1992 240sx coupe
User avatar
JDMCrx91
 
Posts: 5248
Joined: Sat Feb 14, 2009 5:53 pm
Location: DFW,Texas

Next

Return to The Lounge

Who is online

Users browsing this forum: No registered users and 1 guest