Couple updates from this weekend.
My Integra arm rest and center console arrived. Arm rest even came with the rear fog switch! I'm not sure what I wanna wire it up to yet though, as i'm doing the 2 OEM dash switch's for the front and rear fog lights.
So I planned on trimming the center console to match up to the CRX stock console, like this picture:
So I cut the console, and trimmed it close to that picture, then I mounted it in to do some fine tuning and realized I has already cut too much. Turns out the person who did the one above, didn't use the factory bolt holes. Of course looking at it now I can see that's obvious. I want to use the factory bolt holes(as well as find the rear brackets), so I've already sourced another Integra console and i'll be trying this again once it arrives.
My biggest update this weekend was power windows!
The kit I purchased: https://www.amazon.com/gp/product/B003X ... UTF8&psc=1
My installer charged me $100 to put them in and I cannot be happier with the results!
Video of them in action: https://www.flickr.com/photos/148842984 ... res/Z7X3jV
Sorry about the dirty car, I still haven't cleaned it since I bought it, been pretty busy. I also don't know how to embed Flickr videos(just moved over from PhotoBucket).
I'm extremely happy with how the windows turned out, in time i'll be upgrading to EDM door panels and LHD OEM switches, but this is awesome for now!
The next power mod is going to be power windows, I've got my eye on a set, and my installer says all he needs is both mirrors with the harness that comes out of them, and the switch with the plug, everything else he can figure out. I've found a set but it doesn't have the plug for the mirror switch. From just looking at it, it looks to be almost identical to the EF sedan power window switch, can anyone confirm?
As soon as I can find a plug for that switch i'll be ordering them!
Also, both SiR front ends that I found locally never worked out. So i'll be staying with the USDM front, but I did order a set of the Glass ZC Single Bulb adjustable headlights with the switch, so those should be pretty cool. I also ordered the deck lid wing that I like, i'm not 100% sure which trim level it comes off of.
I also ordered a nice looking set of Universal yellow fog lights in hopes to emulate the SiR styling, along with an "SiR" style front lip, pictured below.
I think of all that together will complete the front end nicely, I may look into getting a ZC hood in the future. I've already received my side markers, just haven't installed them yet.
I also picked up a dual switch mount to replace the useless little cubby hole to the left of the steering wheel. I plan on mounting both my fog switches in there.
Got an OEM rear fog switch, as well as an 88-89 rear defrost switch as I've been told them work exactly the same as fog switches. I'll be figuring all that out once the front fogs get here. My taillights came with the 90-91 rear fog switch that replaces the interior dimmer switch, but i'm trying to keep as many options in my CRX as possible, so that switch may be up for sell/trade soon.
Other than that I ordered all my audio set up for the CRX. Flip out touchscreen head unit, 4x 6.5" 4 ways, single 12 in shallow mount sub + box, amp, wiring kit and a backup camera. I can give specifics if anyone really cares.
That's it for the weekend guys. This week i'm hoping to get my interior all cleaned up and install my rear seat. I also wanna start ordering LED's as I want to swap out all of my exterior bulbs with LED's.
Oh yea! Almost forgot, when I went to transfer the title the other week I went ahead and applied for "Classic" plates, they can be put on any 25+ year old car, and I think it's cool to be able to put the "Classic" designation on my CRX.