(Advertisements are not shown for registered users)

ED9 from Poland :)

Show off your CRX. Member rides, pictures, project threads and galleries can go in here.

Moderator: Moderators

Re: ED9 from Poland :)

Postby bonczek » Tue Mar 19, 2013 4:40 pm

;)

Displacement: 1,998 cc (121.9 cu in)
Compression: 11:1
Power: 200 hp(147 kW) @ 7000 rpm
Torque: 142 lb·ft (193 N·m)* (196 N·m) @ 5600 rpm
Redline: 7900 RPM
Revlimiter: 8200 RPM
i-VTEC Engagement: 5800 RPM
My RaceCar - ED9 with K-series - EDM/JDM :D
http://www.crxcommunity.com/viewtopic.p ... 07&start=0
User avatar
bonczek
 
Posts: 73
Joined: Fri Nov 21, 2008 4:56 pm
Location: Poland (Europe)

Re: ED9 from Poland :)

Postby crxvtec91 » Wed Mar 20, 2013 8:38 am

Yea thats just like our k20a2 here in the states, plenty of locals in the 230-250hp range with just bolt-ons and a retune.
My build thread: http://www.crxcommunity.com/viewtopic.php?f=2&t=16812

500hp and 450ft/lbs @30psi

LOOK, go to UserControlPanel->UsercontrolPanel->Profile->UPDATE YOUR DAMN LOCATIONS K?
User avatar
crxvtec91
 
Posts: 4815
Joined: Sun Jun 22, 2008 11:48 pm
Location: NJ

Re: ED9 from Poland :)

Postby bonczek » Wed Mar 20, 2013 2:28 pm

Exhaust header with whole exhaust, intake, hondata + retune and it will be 235-240 I think - this is plan for stage 1 ;)
My RaceCar - ED9 with K-series - EDM/JDM :D
http://www.crxcommunity.com/viewtopic.p ... 07&start=0
User avatar
bonczek
 
Posts: 73
Joined: Fri Nov 21, 2008 4:56 pm
Location: Poland (Europe)

Re: ED9 from Poland :)

Postby crxvtec91 » Wed Mar 20, 2013 3:26 pm

bonczek wrote:Exhaust header with whole exhaust, intake, hondata + retune and it will be 235-240 I think - this is plan for stage 1 ;)


Sounds like a solid plan, does stage 2 involve a k24 short block lol
My build thread: http://www.crxcommunity.com/viewtopic.php?f=2&t=16812

500hp and 450ft/lbs @30psi

LOOK, go to UserControlPanel->UsercontrolPanel->Profile->UPDATE YOUR DAMN LOCATIONS K?
User avatar
crxvtec91
 
Posts: 4815
Joined: Sun Jun 22, 2008 11:48 pm
Location: NJ

Re: ED9 from Poland :)

Postby bonczek » Wed Mar 20, 2013 4:51 pm

crxvtec91 wrote:does stage 2 involve a k24 short block lol


or rotrex - it is always hard to decide thats why many people here made both. Frankly speaking its a long time when I saw stock EP3 in Poland :) this stage1 is must be.
My RaceCar - ED9 with K-series - EDM/JDM :D
http://www.crxcommunity.com/viewtopic.p ... 07&start=0
User avatar
bonczek
 
Posts: 73
Joined: Fri Nov 21, 2008 4:56 pm
Location: Poland (Europe)

Re: ED9 from Poland :)

Postby crxvtec91 » Thu Mar 21, 2013 8:18 am

bonczek wrote:
crxvtec91 wrote:does stage 2 involve a k24 short block lol


or rotrex - it is always hard to decide thats why many people here made both. Frankly speaking its a long time when I saw stock EP3 in Poland :) this stage1 is must be.


I dont know what kind of fuel you have in Poland, but I seen really simple set ups local pull 270-300hp on pump 93 and the same setups make 330hp om e85.
My build thread: http://www.crxcommunity.com/viewtopic.php?f=2&t=16812

500hp and 450ft/lbs @30psi

LOOK, go to UserControlPanel->UsercontrolPanel->Profile->UPDATE YOUR DAMN LOCATIONS K?
User avatar
crxvtec91
 
Posts: 4815
Joined: Sun Jun 22, 2008 11:48 pm
Location: NJ

Re: ED9 from Poland :)

Postby bonczek » Thu Mar 21, 2013 1:27 pm

US HP are different than these in Europe 8)
My RaceCar - ED9 with K-series - EDM/JDM :D
http://www.crxcommunity.com/viewtopic.p ... 07&start=0
User avatar
bonczek
 
Posts: 73
Joined: Fri Nov 21, 2008 4:56 pm
Location: Poland (Europe)

Re: ED9 from Poland :)

Postby bonczek » Thu Jul 25, 2013 4:06 pm

I think it is important update 8)

Image
My RaceCar - ED9 with K-series - EDM/JDM :D
http://www.crxcommunity.com/viewtopic.p ... 07&start=0
User avatar
bonczek
 
Posts: 73
Joined: Fri Nov 21, 2008 4:56 pm
Location: Poland (Europe)

Re: ED9 from Poland :)

Postby Rex All Day » Thu Jul 25, 2013 10:00 pm

dayum son, those are LONG bolts hahah keep it up too, Cant wait to see the K20A in its glory
Black 1991 CRX Si - 1.6 SOHC ZC motor.
Thread: viewtopic.php?f=26&t=62162
User avatar
Rex All Day
 
Posts: 651
Joined: Mon Nov 19, 2012 2:58 am
Location: California

Re: ED9 from Poland :)

Postby bonczek » Sat Sep 14, 2013 1:46 pm

Suspension ready, steering next week ;)

[url="http://s651.photobucket.com/user/bonczek/media/1_zps86140b5d.jpg.html"]Image[/url]
[url="http://s651.photobucket.com/user/bonczek/media/2_zpsf7fb5924.jpg.html"]Image[/url]
[url="http://s651.photobucket.com/user/bonczek/media/3_zps11e60b01.jpg.html"]Image[/url]
[url="http://s651.photobucket.com/user/bonczek/media/4_zps1a092833.jpg.html"]Image[/url]
[url="http://s651.photobucket.com/user/bonczek/media/5_zpsfedaa2e4.jpg.html"]Image[/url]
[url="http://s651.photobucket.com/user/bonczek/media/6_zps7d837518.jpg.html"]Image[/url]
[url="http://s651.photobucket.com/user/bonczek/media/14_zps5f919b4f.jpg.html"]Image[/url]
[url="http://s651.photobucket.com/user/bonczek/media/7_zps59b0c0cb.jpg.html"]Image[/url]
[url="http://s651.photobucket.com/user/bonczek/media/8_zps8f3469bb.jpg.html"]Image[/url]
[url="http://s651.photobucket.com/user/bonczek/media/9_zps8eaf7835.jpg.html"]Image[/url]
[url="http://s651.photobucket.com/user/bonczek/media/10_zpsd68b991e.jpg.html"]Image[/url]
[url="http://s651.photobucket.com/user/bonczek/media/11_zps95683f8e.jpg.html"]Image[/url]
[url="http://s651.photobucket.com/user/bonczek/media/12_zpsca7cbb09.jpg.html"]Image[/url]
[url="http://s651.photobucket.com/user/bonczek/media/13_zpsc37c9096.jpg.html"]Image[/url]
[url="http://s651.photobucket.com/user/bonczek/media/15_zps01edf394.jpg.html"]Image[/url]
My RaceCar - ED9 with K-series - EDM/JDM :D
http://www.crxcommunity.com/viewtopic.p ... 07&start=0
User avatar
bonczek
 
Posts: 73
Joined: Fri Nov 21, 2008 4:56 pm
Location: Poland (Europe)

Re: ED9 from Poland :)

Postby crxvtec91 » Sat Sep 14, 2013 5:51 pm

So fresh and so clean!
My build thread: http://www.crxcommunity.com/viewtopic.php?f=2&t=16812

500hp and 450ft/lbs @30psi

LOOK, go to UserControlPanel->UsercontrolPanel->Profile->UPDATE YOUR DAMN LOCATIONS K?
User avatar
crxvtec91
 
Posts: 4815
Joined: Sun Jun 22, 2008 11:48 pm
Location: NJ

Re: ED9 from Poland :)

Postby bonczek » Sat Dec 14, 2013 3:41 pm

Now project is on FB -> https://www.facebook.com/pages/Honda-CR ... 2285855703

New rims - ATS DTC 5,8kg :]

Image
My RaceCar - ED9 with K-series - EDM/JDM :D
http://www.crxcommunity.com/viewtopic.p ... 07&start=0
User avatar
bonczek
 
Posts: 73
Joined: Fri Nov 21, 2008 4:56 pm
Location: Poland (Europe)

Re: ED9 from Poland :)

Postby Deetz » Sat Dec 14, 2013 8:01 pm

You should consider lining your wheel wells with undercoating. It will give extra protection on the road, and ride quieter
1989 CRX Si
B16 powered
2000 EM1
True Civic SiR

Updated email- deetzcrx@gmail.com
User avatar
Deetz
 
Posts: 178
Joined: Mon Feb 20, 2006 1:37 am
Location: Calgary Alberta

Re: ED9 from Poland :)

Postby bonczek » Fri Dec 27, 2013 12:40 pm

Deetz, sorry, but I am not fully understand - what do you mean writing "lining your wheel wells with undercoating" ?
My RaceCar - ED9 with K-series - EDM/JDM :D
http://www.crxcommunity.com/viewtopic.p ... 07&start=0
User avatar
bonczek
 
Posts: 73
Joined: Fri Nov 21, 2008 4:56 pm
Location: Poland (Europe)

Re: ED9 from Poland :)

Postby bonczek » Sun Jan 19, 2014 3:07 pm

282mm front, 259mm rear, Quaife steering rack.

Image
Image
Image
Image
Image
Image[/url]
Image
Image
Image
Image
My RaceCar - ED9 with K-series - EDM/JDM :D
http://www.crxcommunity.com/viewtopic.p ... 07&start=0
User avatar
bonczek
 
Posts: 73
Joined: Fri Nov 21, 2008 4:56 pm
Location: Poland (Europe)

Re: ED9 from Poland :)

Postby bonczek » Tue May 20, 2014 1:47 pm

Some news :)

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
My RaceCar - ED9 with K-series - EDM/JDM :D
http://www.crxcommunity.com/viewtopic.p ... 07&start=0
User avatar
bonczek
 
Posts: 73
Joined: Fri Nov 21, 2008 4:56 pm
Location: Poland (Europe)

Re: ED9 from Poland :)

Postby fraglerock » Tue May 20, 2014 2:36 pm

bonczek wrote:Image
Image


So sexy, do they make one for the passenger side?
User avatar
fraglerock
 
Posts: 369
Joined: Tue Jan 08, 2013 10:27 pm
Location: Los Angeles

Re: ED9 from Poland :)

Postby bonczek » Tue May 20, 2014 3:03 pm

Of course, it is still available but I don`t need ;)
My RaceCar - ED9 with K-series - EDM/JDM :D
http://www.crxcommunity.com/viewtopic.p ... 07&start=0
User avatar
bonczek
 
Posts: 73
Joined: Fri Nov 21, 2008 4:56 pm
Location: Poland (Europe)

Re: ED9 from Poland :)

Postby m0bman » Wed May 21, 2014 8:38 am

would that fit rhd ef8?


Sent from my iPad using Tapatalk
m0bman
 
Posts: 43
Joined: Tue Jun 28, 2011 11:35 pm

Re: ED9 from Poland :)

Postby crxvtec91 » Wed May 21, 2014 8:56 am

Love the updates, BUT HB shifter box...........

I had the same shifter box on my J swap car, ALL the screws back out at one point or another. I was force to take it apart after 1000 miles, re-grease the ball areas and lock tight ever screw. The box also develop massive play around 5000 miles :evil: .
My build thread: http://www.crxcommunity.com/viewtopic.php?f=2&t=16812

500hp and 450ft/lbs @30psi

LOOK, go to UserControlPanel->UsercontrolPanel->Profile->UPDATE YOUR DAMN LOCATIONS K?
User avatar
crxvtec91
 
Posts: 4815
Joined: Sun Jun 22, 2008 11:48 pm
Location: NJ

Re: ED9 from Poland :)

Postby bonczek » Wed May 21, 2014 11:22 am

I am convinced that it will not fit RHD.

Nice story with this shifter box - as I said before I must almost everything from US and I am waiting for package ~2,5 month so when my friend told me that someone has one for sale in Poland, I was not wondering lot time, to take it or not - we will see. If it is crap as you told me, I will buy one from Ktuned.
My RaceCar - ED9 with K-series - EDM/JDM :D
http://www.crxcommunity.com/viewtopic.p ... 07&start=0
User avatar
bonczek
 
Posts: 73
Joined: Fri Nov 21, 2008 4:56 pm
Location: Poland (Europe)

Re: ED9 from Poland :)

Postby crxvtec91 » Wed May 21, 2014 11:40 am

Locktite the bolts before use should help!
My build thread: http://www.crxcommunity.com/viewtopic.php?f=2&t=16812

500hp and 450ft/lbs @30psi

LOOK, go to UserControlPanel->UsercontrolPanel->Profile->UPDATE YOUR DAMN LOCATIONS K?
User avatar
crxvtec91
 
Posts: 4815
Joined: Sun Jun 22, 2008 11:48 pm
Location: NJ

Re: ED9 from Poland :)

Postby bonczek » Wed May 21, 2014 3:31 pm

I will do so and take some more grease in some places, thx for info! :)
My RaceCar - ED9 with K-series - EDM/JDM :D
http://www.crxcommunity.com/viewtopic.p ... 07&start=0
User avatar
bonczek
 
Posts: 73
Joined: Fri Nov 21, 2008 4:56 pm
Location: Poland (Europe)

Re: ED9 from Poland :)

Postby HARD2BEAT » Wed May 21, 2014 6:28 pm

:-)b
1991 Honda crx si H2B
2001 acura integra type R

[Instagram] Mack187s
User avatar
HARD2BEAT
 
Posts: 167
Joined: Tue Feb 08, 2011 3:32 pm

Re: ED9 from Poland :)

Postby crxvtec91 » Thu May 22, 2014 8:37 am

bonczek wrote:I will do so and take some more grease in some places, thx for info! :)

:-)b
My build thread: http://www.crxcommunity.com/viewtopic.php?f=2&t=16812

500hp and 450ft/lbs @30psi

LOOK, go to UserControlPanel->UsercontrolPanel->Profile->UPDATE YOUR DAMN LOCATIONS K?
User avatar
crxvtec91
 
Posts: 4815
Joined: Sun Jun 22, 2008 11:48 pm
Location: NJ

PreviousNext

Return to The Showroom

Who is online

Users browsing this forum: Baidu [Spider] and 2 guests