alright got a couple of questions and some updates. First off, finally got around to putting in the new transmission I got from CRXGarage. Its amazing what a coat of paint can do
I guess everyone was right on my last one. Here is the damage I found after taking the trans out.
So heres a question, the new trans doesn't have this piece for the speedo cable.
Can I remove it from the old one(this pic)? If so, How? is it simply unthreaded? Or do I even need it and im just not smart enough to reinstall the speedo cable? I'm sure its a combination of both, cause on the old trans I'm not even sure I understand how it supposed to go. Is it simply a pressure fit?
Anyway, said whatever I REALLY want to take it for a test drive, so I loaded up and back out into the street, tried to shift into first, then this happened.
snapped it right off, BECAUSE I'm impatient and didn't bother to replace the shift linkage bushing. So when I went to shift it didn't line up, and the weakest link was the shifter I guess cause that's what gave.
So, with that being said, is this what I need? https://www.amazon.com/Energy-Suspension-16-1102R-Transmission-Stabilizer/dp/B000CN937G/ref=pd_sim_263_3?_encoding=UTF8&pd_rd_i=B000CN937G&pd_rd_r=WTVDR6WN2GFXSP4PGPN1&pd_rd_w=0Z6vB&pd_rd_wg=niU79&psc=1&refRID=WTVDR6WN2GFXSP4PGPN1
Give me some advice here on a new shifter and bushings. Not wanted to be too expensive cause this is the toy car. Just let me know your opinions, thanks.