I have a 90 CRX HF with a bent (LH) steering knuckle. Does anyone know if I can install a 90 CRX SI steering knuckle on my HF? The Honda part numbers are not the same (SI knuckle verses the HF knuckle). The HF part number is (LH)- 51215-SH2-AO1 - The SI part number is (LH) - 51215-SH3-O3O Any help will be greatly appreciated. Thanks Pete
Yes,if you have a new bearing, access to a press, and assuming the diameters are compatible. I haven't compared them closely enough to say that the hubs and/or bearings can be swapped. Maybe someone else knows better.
CRXCommunity.com is not affiliated with, supported, sponsored, or endorsed by American Honda Motor Company. Any and all trademarks are property of their respective owners. Copyright/trademark/sales mark infringements are neither intended or implied.