1991 Crx Si w/ b20b, gsr trans & tuned obd1 Ecu.
Months ago my turn signal side bulb went out, the one next to the running light, so I upgraded it to led. Few months later the other went out, so I did the same. Drove like that for a few weeks, then I noticed something odd. When I use the left signal, all the lefts go off normally. When I use the right, all rights go off except the side marker, and the left one goes off in its place. So basically when I use the right, the left side goes off.
So I replaced all the fuses, and the relays, and installed resistors, and the turnsignal hazard switch even the turn signal/headlight combination switch. Same issue.
I removed the resistors and installed the factory bulbs, same thing.
The interesting part is, with the resistors in, the right goes off as normal, but very quickly. And the left goes off normally but very dim.
So what do I do next?