(Advertisements are not shown for registered users)

No idle condition

Got a problem with your stock CRX? This is where you should start.

Moderator: Moderators

No idle condition

Postby D0meFractureXX » Sun Nov 01, 2020 6:00 pm

I recently swapped over my sohc ZC from my old crx to a new one along with all the wiring fuse box dash etc from a 91 si, but after the swap into the new chassis with everything hooked up the car cranks and almost starts but dies. If i mash the throttle i can get it to run but it immediately dies when i let off (I get a code 14 if i do this). I didnt have a single problem before i swapped the motor over, nothing related to idle or the iacv or main relay or anything and fuel pump primes. Car ran flawlessly, has anybody had a similar issue on their first swap?
D0meFractureXX
 
Posts: 12
Joined: Sat Dec 03, 2011 9:06 pm

Re: No idle condition

Postby ykf7b0 » Sun Nov 01, 2020 9:24 pm

Have you had the distributor out? Either way, check the timing.
Black 1989 D16A6 si
ykf7b0
 
Posts: 286
Joined: Sat Sep 26, 2015 11:16 am
Location: The South

Re: No idle condition

Postby D0meFractureXX » Mon Nov 02, 2020 7:13 am

Nope i swapped everything over with distributor connected but i will check the timing today, thanks
D0meFractureXX
 
Posts: 12
Joined: Sat Dec 03, 2011 9:06 pm

Re: No idle condition

Postby D0meFractureXX » Mon Nov 02, 2020 11:15 am

Well if I unbolt the iacv the car idles fluctuating between 1500 and 2500 rpm. Car still stalls with the iacv plugged in... no difference with the iacv plugged in or unplugged
D0meFractureXX
 
Posts: 12
Joined: Sat Dec 03, 2011 9:06 pm


Return to Stock Garage

Who is online

Users browsing this forum: No registered users and 14 guests